45mm Glass Adapter for 8-21.5mm Glass - Metric and Wood Thread Included

In stock

SKU 6000.22.020

Glass Adapters are used to mount glass directly to a vertical surface via holes in the glass pane. No need for base plates or channel – just four Glass Adapters for every 1.5m of glass. This is often a more cost-effective way of achieving a modern Glass Balustrade look.

The Glass Adapters from SWR allow for the installation of a structural glass balustrade in almost any location. Whether you require a Juliet balcony or a glass balustrade for your staircase or terrace these brackets are the ideal solution.

These brackets can incorporate 8mm - 21.5mm thick glass, have side drive holes in the boss for tightening and are supplied complete with soft rubbers. They require a 25mm diameter hole in the glass and are easy to install – simply screw-in or chemically attach with resin.


  • Supplied with Metric and Wood thread bolt.
  • Brushed Satin Finish
  • Made from AISI 316 Stainless Steel, suitable for both internal and external projects – see “GRADE (AISI) EXPLAINED” section below for more details.
  • Whether residential or commercial, our range offers a cost effective solution to meet your project needs.
  • This component have been designed and manufactured to comply with the industry standards and regulations and, as a system, has been tested by the British Standards Institute to BS 6180.
A (mm)
B (mm)
C (mm)
D (⌀ mm)
E (Max. mm)
6 10 8-21.5 45 46

Our balustrade range comprises of AISI 304 and AISI 316 stainless steel, both of which are available in a 320 grit brushed satin finish or a mirror polished finish.

AISI 304 and 316 stainless steel appear the same but perform very differently depending on the surrounding environment. This is due to the differences in the chemical composition between the two grades with AISI 316 offering more resistance to corrosion due to the molybdenum content.

In line with industry guidelines, as a general rule we recommend AISI 316 for outdoor use and AISI 304 for interior projects.

Although satin and mirror polished contain the same chemical composition, they appear very different due to the final surface finish. The mirror finish is polished down to approximately 0.2 microns, which produces a very smooth and reflective surface, making it the most suitable finish for coastal and busy industrial areas containing high emissions. Unlike the satin finish, which is polished down to approximately 0.5 microns, mirror polished provides minimal areas for corrosive elements in the air to rest, which potentially cause permanent damage to your system.

The table below can be used as a rough guide to which grade/finish is appropriate for certain environments.

Stainless Steel Grades & Finishes
Satin 304
Satin 316
Mirror 304
Mirror 316
Product Questions

We found other products you might like!

52mm Glass Adapter for 10-21.5mm Glass - Metric and Wood Thread Included


£15.00 Inc Vat

Out of stock

52mm Glass Adapter for 10-20mm Glass - 30mm Stand-Off - Metric Thread Included


£19.50 Inc Vat
52mm Glass Adapter for 10-20mm Glass - 50mm Stand-Off - Metric Thread Included


£22.00 Inc Vat
Flat D Shaped Glass Clamp for 10mm Glass AISI 316


£10.50 Inc Vat